ANEMA & CORE

Return to Search

Specifications

Name: ANEMA & CORE
Builder: C & C Yachts
Model: 30 Grand Prix Race Package
Length: 30' 0" (9m)
Beam: 9' 10" (3.00m)
Year Built / Refit: 2015
Engines: 1 x Volvo Penta D1-13
Staterooms: 1
Flag: United States
 
View Brochure

Description

C&C 30 by US Watercraft - This is a grand prix program.   Indoor climate control storage.  Ready to go race Program!   No expense spared! 

Call today for a showing! 

Features

CONSTRUCTION DETAILS
  • Hull and deck are Vinylester / E-Glass / Foam Core Resin-Infused, Carbon Reinforcing in Structural Grid.
  • Keel: Carbon Fiber Fin / Lead Bulb / Retracts for Transport
  • Rudder: Carbon Fiber Stock / E-Glass and Carbon Fiber Reinforced Blade
  • Self-Aligning Roller Bearings

INTERIOR LAYOUT
  • Open racing interior
  • Porta-Potty forward
  • 2 settee berths amidships
  • Storage under berths

ELECTRICAL
  • 12v DC Distribution Panel

  • Main Battery Switch

  • Battery 70 RC/55 AH Deep Cycle (Second Battery Optional)

  • Alternator 115 Amp

  • ORC ApprovedNavigation Lights

  • LED Overhead Lights

  • 12v DC bilge pump option installed


ELECTRONICS
  • B&G H5000 CPU Hercules

  • B&G Go Free Wireless system

  • 4 B&G 20/20 Displays on mast pod

  • 1 B&G H500 color Graphic Display

  • H5000 Speed Sensor

  • DT800 Depth Sensor

  • B&G Vertical MHU Wind Sensor

  • RC42N Compass

  • Panasonic Tough book with Expedition

  • System Professionally Calibrated


MECHANICAL
  • Inboard Diesel Engine, Volvo Sail-drive 12 HP
  • Two Blade Folding Race Propeller
  • Fuel Tank 6.5 US Gallon (25 liter)
  • Fuel Filter & Water Separator
  • Water-lock Muffler

DECK GEAR
  • Primary Winches: 2 x Harken 40.2 PT

  • Backstay Winches: 2 x Harken 35.2 ST

  • Handles: 3 x Harken

  • Custom Bow / Stern Pulpits with Running Lights

  • Stanchions: Tapered S/S with Braces

  • Lifelines: Dyneema Upper & Lower

  • Rope Clutches, Spinlock

  • Jib Leads, Athwart ship In/Out Up/ Down

  • Controls Below Deck to Trimmer

  • Jib Cunningham Below Deck to Trimmer

  • Cunningham 5:1 & Outhaul 8:1 lead aft to pit

  • Mainsheet: 16:1, Coarse Tune / Fine Tune

  • Traveler 4:1 to Main Trimmer

  • Vang, Spectra 16:1Tack line to Spinlock Clutch

  • Foredeck Hatch Lewmar 22” Diameter Round

  • Accessible Port on Cockpit Face for Lines

  • Composite Tiller with Tiller Extension


RIG AND RIGGING
  • Hall Spars Carbon Fiber Rig: Two Sets Swept Spreaders  
  • Carbon Bow Sprit, Removable for Docking & Transport
  • Halyard Locks for Main & Primary Jib
  • Aluminum Boom with 8:1 Outhaul & Provision for 1 Reef
  • Two Dyneema Topmast Running Backstays
  • Shrouds: 1 X 19 S/S Wire
  • New England Ropes Running Rigging Package
  • All Necessary Blocks, Cleats, and Halyard Locks
  • Optional hydraulic mast jack installed
  • Optional Harken Carbo Foil installed
  • Optional second jib halyard installed
  • Optional GP upgraded running rigging package included

SAILS
  • Main- 2015 not buttoned Chesapeake Sail makers

  • Main- 2016 buttoned Chesapeake Sail makers

  • Main- 2017 buttoned Elvstrom

  • J1- 2015 buttoned Chesapeake Sail Makers

  • J1- 2017 buttoned Elvstrom

  • J2- 2015 not buttoned Chesapeake Sail makers

  • J2- 2016 buttoned Chesapeake Sail makers

  • J2- 2017 buttoned Elvstrom

  • J3- 2016 buttoned Chesapeake Sail makers

  • A1- 2016 not buttoned Chesapeake Sail makers

  • A1.5- 2015 not buttoned Chesapeake Sail makers

  • A1.5- 2017 buttoned Elvstrom

  • A2- 2015 not buttoned Chesapeake Sail makers

  • A2-2017 buttoned Elvstrom

  • A3- 2017 buttoned Elvstrom – Never Used


ADDITIONAL DETAILS
  • TRAILER - High/Low galvanized steel with hull formed bunks

  • Grand Prix race bottom to 600 grit finish
  • Sea-deck 5mm non-skid in cockpit (New November 2016)
  • Carbon Fiber Bow Roller for Spinnaker takedown system
  • Single point lift harness
  • Keel Clamshell for trailering
  • Custom Mast Cover
  • Custom Boom Cover
  • Custom Tiller Cover
  • Custom Padded bow Sprit Cover
  • Instrument mast pod Cover
  • Spreader Bag
  • Dehumidifier
  • Trailer box
  • 4 Dock lines, 3 fenders

SPARES
  • Jib Sheets

  • Spinnaker Sheets

  • RunnersRunner Tails

  • Main Halyard

  • Spinnaker Halyard

  • Tiller

  • Wind cups and Windex


BROKER COMMENTS

Anema & Core is a professionally maintained, complete turnkey package ready to launch and race. Always dry-sailed and currently stored indoors in a climate-controlled facility. The name Anema & Core is reserved by the Seller and is not transferable to a Buyer.

Contact us today to answer any questions or to make arrangement for a showing.

You will NOT be disappointed!